Thursday, December 22, 2011

Programming of Merlin garage door opener

Your purple button is the learn button.

  1. Go to your wall control panel
  2. Press and release the PURPLE “learn” button on the opener. The orange indicator light will glow steadily for 30 seconds.
  3. Within 30 seconds, press and hold the desired button on the wireless wall control or remote control that you wish to operate your garage door.
  4. Release the button when the opener light blinks. It has learned the code.
DELETE all Remote Control Codes

Please note this deletes all remotes and codes.
Press and hold the PURPLE learn button until the orange indicator light goes out (approximately 9 sec).

No comments:

Post a Comment